D-Link xStack DGS-3620 Series - Page 506

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
501
DGS-3620-28PC:admin#
37-12 show multicast vlan_filtering_mode
Description
This command is used to display the multicast packet filtering mode for VLANs.
Format
show multicast vlan_filtering_mode {[vlanid <vidlist> | vlan <vlan_name 32>]}
Parameters
vlanid - (Optional) Specifies to display the entries by VLAN ID list.
<vidlist> - Enter to display the entries by VLAN ID list.
vlan - (Optional) Specifies to display the entries for a specific VLAN.
<vlan_name 32> - The maximum length is 32 characters.
Restrictions
None.
Example
To show multicast filtering mode for ports:
DGS-3620-28PC:admin#show multicast vlan_filtering_mode
Command: show multicast filtering_mode
VLAN ID/VLAN Name Multicast Filter Mode
------------------------------- -----------------------------
default forward_unregistered_groups
DGS-3620-28PC:admin#