To Next Page

To Previous Page

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

507

<unit_id> - Enter the unit ID value here.

<drive_id> - Specifies the drive ID. If not specified, it refers to the current drive.

<pathname> - Enter the file to be deleted. If it is specified in the associated form, then it is

related to the current directory.

Restrictions

Only Administrators and Operators can issue this command.

Example

To delete a file:

DGS-3620-28PC:admin#erase cfg

Command: erase cfg

Are you sure to remove the boot up Configuration from this device? (y/n)y

Success.

DGS-3620-28PC:admin#

38-8 format

Description

This command is used to format a specific drive.

Format

format {unit <unit_id>} <drive_id> {[fat16 | fat32]} {<label_name>}

Parameters

unit - Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.

<unit_id> - Enter the unit ID value here.

<drive_id> - Specifies the drive ID.

fat16 - (Optional) Specifies that the drive will be formatted to support a FAT16 file system.

fat32 - (Optional) Specifies that the drive will be formatted to support a FAT32 file system.

<label_name> - (Optional) Enter the label name used for this drive here.

Restrictions

Only Administrators and Operators can issue this command.

Example

To format media:

D-Link xStack DGS-3620 Series User Manual

Questions and Answers: