D-Link xStack DGS-3620 Series - Page 521

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
516
40-2 delete flex_link group_id
Description
This command is used to delete a flexlink group.
Format
delete flex_link group_id <value>
Parameters
group_id - Specifies the Flex Link group ID.
<value> - Enter the group ID here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create the Flex Link with group id=1:
DGS-3620-28PC:admin# delete flex_link group_id 1
Command: delete flex_link group_id 1
Success.
DGS-3620-28PC:admin#
40-3 show flex_link
Description
This command is used to display flex_link configuration information.
Format
show flex_link {group_id <value>}
Parameters
group_id - Specifies the flex link group to display.
If no group is specified, the configuration for all groups will be displayed.
<value> - Enter the group ID here.
Restrictions
All-level users can issue this command.
Example
To display flex_link settings: