D-Link xStack DGS-3620 Series - Page 529

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
524
Example
This example shows how to upload a firmware file from the Switch to an FTP server.
DGS-3620-28PC:admin# upload firmware_toFTP ftp:
john:123456@10.54.71.1:21/image/image.had 260b11.had
Command: upload firmware_toFTP ftp: john:123456@10.54.71.1:21/image/image.had
260b11.had
Connecting to server................... Done.
Upload firmware........................ Done.
DGS-3620-28PC:admin#
41-6 upload log_toFTP
Description
This command is used to upload a log file from the Switch to an FTP server.
Format
upload log_toFTP [[<ipaddr> | <ipv6addr>] {tcp_port <tcp_port_number 1-65535>} dest_file
<path_filename 64> | ftp: <string 128>]
Parameters
<ipaddr> - Enter the IPv4 address of the FTP server here.
<ipv6addr> - Enter the IPv6 address of the FTP server here.
tcp_port - (Optional) Specifies the TCP port number used for the FTP connection.
<tcp_port_number 1-65535> - Enter the TCP port number here. This value must be between
1 and 65535.
dest_file - Specifies the destination file name and path.
<path_filename 64> - Enter the destination file name and path here. This can be up to 64
characters long.
ftp: - Specifies the FTP connection details.
<string 128> - Enter the FTP connection details here. For example,
john:123456@172.18.211.41:21/image/cfg.txt.
Restrictions
Only Administrators and Operators can issue this command.
Examples
This example shows how to upload the log file to an FTP server.
DGS-3620-28PC:admin# upload log_toFTP 10.90.90.15 d:/log.txt
Command: upload log_toFTP 10.90.90.15 d:/log.txt
Connecting to server................... Done.
User(Anonymous): john
Pass:******
Upload log............................. Done.