D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
530
Success.
DGS-3620-28PC:admin#
42-7 show gratuitous_arp
Description
This command is used to display gratuitous ARP configuration.
Format
show gratuitous_arp {ipif <ipif_name 12>}
Parameters
ipif - (Optional) The interface name of the L3 interface.
<ipif_name 12> - Enter the interface name. The maximum length is 12 characters.
Restrictions
None.
Example
To display the gratuitous ARP configuration:
DGS-3620-28PC:admin#show gratuitous_arp
Command: show gratuitous_arp
Send on IPIF Status Up : Disabled
Send on Duplicate IP Detected : Disabled
Gratuitous ARP Learning : Disabled
IP Interface Name : System
Gratuitous ARP Trap : Disabled
Gratuitous ARP Log : Enabled
Gratuitous ARP Periodical Send Interval : 0
Total Entries: 1
DGS-3620-28PC:admin#

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English