D-Link xStack DGS-3620 Series - Page 555

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
550
Note: If no parameter is specified, the system will display all current IGMP snooping
configuration.
Restrictions
None.
Example
To show IGMP snooping:
DGS-3620-28PC:admin# show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Enabled
VLAN Name : default
Query Interval : 80
Max Response Time : 8
Robustness Value : 3
Last Member Query Interval : 2
Querier State : Enabled
Querier Role : Querier
Querier IP : 10.90.90.1
Querier Expiry Time : 0 secs
State : Enabled
Topology Changes Notification : Process
Fast Leave : Enabled
Rate Limit(pkt/sec) : No Limitation
Proxy Reporting : Disabled
Proxy Reporting Source IP : 0.0.0.0
Version : 3
Total Entries: 1
DGS-3620-28PC:admin#
45-8 show igmp_snooping group
Description
This command is used to display the current IGMP snooping group configuration on the switch.
Format
show igmp_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
{<ipaddr>}}
Parameters
vlan - (Optional) Specifies the name of the VLAN for which you want to view IGMP snooping