D-Link xStack DGS-3620 Series - Page 575

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
570
46-9 delete igmp_snooping multicast_vlan
Description
This command is used to delete an IGMP snooping multicast VLAN.
Format
delete igmp_snooping multicast_vlan <vlan_name 32>
Parameters
<vlan_name 32> - Enter the name of the multicast VLAN to be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an IGMP snooping multicast VLAN called “v1”:
DGS-3620-28PC:admin#delete igmp_snooping multicast_vlan v1
Command: delete igmp_snooping multicast_vlan v1
Success.
DGS-3620-28PC:admin#
46-10 enable igmp_snooping multicast_vlan
Description
This command is used to enable the IGMP snooping multicast VLAN function. By default, the
multicast VLAN is disabled.
Format
enable igmp_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable IGMP snooping multicast VLAN: