D-Link xStack DGS-3620 Series - Page 659

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
654
<port> - Enter the port number here.
Restrictions
None.
Example
To display the DHCP snooping binding entries:
DGS-3620-28PC:admin# show address_binding dhcp_snoop binding_entry
Command: show address_binding dhcp_snoop binding_entry
S (Status) - A: Active, I: Inactive
Time - Left Time (sec)
IP Address MAC Address S LT(sec) Port
--------------------------------------- ----------------- -- ---------- -----
10.62.58.35 00-0B-5D-05-34-0B A 35964 1
10.33.53.82 00-20-c3-56-b2-ef I 2590 2
2001:2222:1111:7777:5555:6666:7777:8888 00-00-00-00-00-02 I 50 5
2001::1 00-00-00-00-03-02 A 100 6
Total entries : 4
DGS-3620-28PC:admin#
Note: “Inactive” indicates that the entry is currently inactive due to port link down.
53-18 show address_binding dhcp_snoop limit_rate
Description
This command is used to display the DHCP snooping limit rate entries.
Format
show address_binding dhcp_snoop limit_rate {ports <portlist>}
Parameters
port – (Optional) Specifies the port used for this configuration.
<port> - Enter the port number used here.
Restrictions
None.
Example
To display the DHCP snooping limit rate entries on ports 1 to 10: