D-Link xStack DGS-3620 Series - Page 676

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
671
DGS-3620-28PC:admin#disable jwac
Command: disable jwac
Success.
DGS-3620-28PC:admin#
54-3 enable jwac redirect
Description
This command is used to enable JWAC redirect. When redirect quarantine_server is enabled,
the unauthenticated host will be redirected to a quarantine server when it tries to access a random
URL. When redirect jwac_login_page is enabled, the unauthenticated host will be redirected to
the jwac_login_page on the Switch to finish authentication.
Format
enable jwac redirect
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable JWAC redirect:
DGS-3620-28PC:admin#enable jwac redirect
Command: enable jwac redirect
Success.
DGS-3620-28PC:admin#
54-4 disable jwac redirect
Description
This command is used to disable JWAC redirect. When redirect is disabled, only access to
quarantine_server and the jwac_login_page from an unauthenticated host is allowed, all other
Web access will be denied.
Format
disable jwac redirect