xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
691
Command: config jwac authentication_page element japanese password_title
パスワー
ド
Success.
DGS-3620-28PC:admin# config jwac authentication_page element japanese
logout_window_title ãƒã‚°ã‚¢ã‚¦ãƒˆ
Command: config jwac authentication_page element japanese logout_window_title ãƒ
グアウト
Success.
54-31 config jwac authorization attributes
Description
This command is used to enable or disable acceptation of authorized configuration. When the
authorization is enabled for JWAC’s RADIUS, the authorized data assigned by the RADUIS server
will be accepted if the global authorization network is enabled. When the authorization is enabled
for JWAC’s local, the authorized data assigned by the local database will be accepted.
Format
config jwac authorization attributes {radius [enable | disable] | local [enable | disable]}(1)
Parameters
radius - If specified to enable, the authorized data assigned by the RADUIS server will be
accepted if the global authorization network is enabled.The default state is enabled.
enable - Specifies to enable authorized data assigned by the RADUIS server to be accepted.
disable - Specifies to disable authorized data assigned by the RADUIS server from being
local - If specified to enable, the authorized data assigned by the local database will be accepted
if the global authorization network is enabled. The default state is enabled.
enable - Specifies to enable authorized data assigned by the local database to be accepted.
disable - Specifies to disable authorized data assigned by the local database from being
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the configuration authorized from the local database:
DGS-3620-28PC:admin#config jwac authorization attributes local disable
Command: config jwac authorization attributes local disable
Success.