D-Link xStack DGS-3620 Series - Page 702

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
697
Format
show lacp_port {<portlist>}
Parameters
<portlist> - (Optional) Specifies a range of ports to be displayed.
Note: If no parameter is specified, the system will display current LACP mode for all
ports.
Restrictions
None.
Example
To display the current LACP mode for ports 1 to 3 on the switch:
DGS-3620-28PC:admin#show lacp_port 1:1-1:3
Command: show lacp_port 1:1-1:3
Port Activity LACP Timeout
----- -------- -----------
1:1 Passive Short
1:2 Passive Short
1:3 Passive Short
DGS-3620-28PC:admin#