D-Link xStack DGS-3620 Series - Page 706

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
701
Format
enable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the Layer 2 protocol tunneling function:
DGS-3620-28PC:admin# enable l2protocol_tunnel
Command: enable l2protocol_tunnel
Success.
DGS-3620-28PC:admin#
57-4 disable l2protocol_tunnel
Description
Used to disable the Layer 2 protocol tunneling function.
Format
disable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the Layer 2 protocol tunneling function:
DGS-3620-28PC:admin# disable l2protocol_tunnel
Command: disable l2protocol_tunnel
Success.
DGS-3620-28PC:admin#