xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
725
To exclude the system name TLV from the outbound LLDP advertisements for all ports:
DGS-3620-28PC:admin#config lldp ports all basic_tlvs system_name enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
To exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DGS-3620-28PC:admin#config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
To exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements for all
ports:
DGS-3620-28PC:admin#config lldp ports all dot1_tlv_protocol_vid vlanid 1-3
enable
Command: config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Success.
To exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DGS-3620-28PC:admin#config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Success.
To exclude the protocol identity TLV from the outbound LLDP advertisements for all ports:
DGS-3620-28PC:admin#config lldp ports all dot1_tlv_protocol_identity all enable
Command: config lldp ports all dot1_tlv_protocol_identity all enable
Success.
To Next Page
Loading...
Need help?
General
