D-Link xStack DGS-3620 Series - Page 761

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
756
Restrictions
None.
Example
To show the switch’s MAC address table notification global settings:
DGS-3620-28PC:admin#show mac_notification
Command: show mac_notification
Global MAC Notification Settings
State : Enabled
Interval : 1
History Size : 500
DGS-3620-28PC:admin#
64-6 show mac_notification ports
Description
This command is used to display the port’s MAC address table notification status settings.
Format
show mac_notification ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a range of ports to be configured.
Restrictions
None.
Example
To display the MAC address table notification status settings of all ports: