D-Link xStack DGS-3620 Series - Page 77

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
72
Parameters
<string 15> - Enter the user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a user-defined authentication server group:
DGS-3620-28PC:admin#delete authen server_group mix_1
Command: delete authen server_group mix_1
Success.
DGS-3620-28PC:admin#
4-19 show authen server_group
Description
This command is used to display the authentication server groups.
Format
show authen server_group {<string 15>}
Parameters
<string 15> - (Optional) Specifies the built-in or user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server groups:
DGS-3620-28PC:admin#show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
--------------- --------------- --------
mix_1 10.1.1.222 TACACS+
radius 10.1.1.224 RADIUS
tacacs 10.1.1.225 TACACS
tacacs+ 10.1.1.226 TACACS+
xtacacs 10.1.1.227 XTACACS
Total Entries : 5