D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
770
Guest VLAN :
Guest VLAN Member Ports:
RADIUS Authorization : Enabled
Local Authorization : Enabled
Trap State : Enabled
Log State : Enabled
DGS-3620-28PC:admin#
To display MAC-based access control information for ports 1 to 4:
DGS-3620-28PC:admin#show mac_based_access_control ports 1-4
Command: show mac_based_access_control ports 1-4
Port State Aging Time Block Time Max User
(min) (sec)
----- -------- ---------- --------- --------
1 Disabled 1440 300 1024
2 Disabled 1440 300 1024
3 Disabled 1440 300 1024
4 Disabled 1440 300 1024
DGS-3620-28PC:admin#
65-17 show mac_based_access_control_local
Description
This command is used to display MAC-based access control local data.
Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
Parameters
mac - (Optional) Display MAC-based access control local databases by this MAC address.
<macaddr> - Enter the MAC address here.
vlan - (Optional) Specifies the VLAN.
<vlan_name 32> - Enter the VLAN name up to 32 characters long.
vlanid - (Optional) Specifies the VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID value between 1 and 4094.
Restrictions
None.
Example
To display MAC-based access control local data:

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English