D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
794
DGS-3620-28PC:admin#
69-8 show mld_snooping statistic counter
Description
This command is used to display the MLD snooping statistics counters for MLD protocol packets
that are transmitted or received by the switch since MLD snooping was enabled.
Format
show mld_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list> | ports
<portlist>]
Parameters
vlan - Specifies a VLAN to be displayed.
<vlan_name 32> - Enter the VLAN name. The maximum length is 32 characters.
vlanid - Specifies a list of VLANs to be displayed.
<vlanid_list> - Enter the VLAN ID list.
ports – Specifies a list of ports to be displayed.
<portlist> - Enter a list of ports.
Restrictions
None.
Example
To display the MLD snooping statistics counters on port 1:

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English