D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
799
Example
To set up ports as forbidden router port:
DGS-3620-28PC:admin#config mld_snooping mrouter_ports_forbidden vlan default
add 1-10
Command: config mld_snooping mrouter_ports_forbidden vlan default add 1-10
Success.
DGS-3620-28PC:admin#
69-13 enable mld_snooping
Description
This command is used to enable MLD snooping on the switch.
Format
enable mld_snooping
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable MLD snooping on the switch:
DGS-3620-28PC:admin#enable mld_snooping
Command: enable mld_snooping
Success.
DGS-3620-28PC:admin#
69-14 disable mld_snooping
Description
This command is used to disable MLD snooping on the switch. MLD snooping can be disabled
only if IPv6 multicast routing is not being used. Disabling MLD snooping allows all MLD and IPv6
multicast traffic to flood within a given IPv6 interface.
Format
disable mld_snooping

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English