D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
801
VLAN Name : default
Query Interval : 80
Max Response Time : 8
Robustness Value : 3
Last Listener Query Interval : 2
Querier State : Enabled
Querier Role : Querier
Querier IP : FE80::2CC:FF:FE11:2233
Querier Expiry Time : 0 secs
State : Enabled
Topology Changes Notification : Process
Fast Done : Enabled
Rate Limit(pkt/sec) : No Limitation
Proxy Reporting : Disabled
Proxy Reporting Source IP : ::
Version : 2
Total Entries: 1
DGS-3620-28PC:admin#
69-16 show mld_snooping group
Description
This command is used to display the current MLD snooping group information on the switch.
Format
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
{<ipv6addr>}}
Parameters
vlan - (Optional) Specifies the name of the VLAN for which to view MLD snooping group
information. If VLAN and ports and IP address are not specified, the system will display all
current MLD snooping group information.
<vlan_name 32> - Specifies the VLAN name. The maximum length is 32 characters.
vlanid - (Optional) Specifies the ID of the VLAN for which to view MLD snooping group
information.
<vlanid_list> - Enter the VLAN ID list.
ports - (Optional) Specifies the list of port for which to view MLD snooping group information.
<portlist> - Enter a range of ports to be displayed.
<ipv6addr> - (Optional) Specifies the group IPv6 address for which to view MLD snooping group
information.
If no parameter is specified, the system will display all MLD snooping groups on the switch.
Restrictions
None.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English