To Next Page

To Previous Page

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

803

Note: If no parameter is specified, the system will display all router ports on the Switch.

Restrictions

None.

Example

To display router ports:

DGS-3620-28PC:admin#show mld_snooping mrouter_ports all

Command: show mld_snooping mrouter_ports all

VLAN Name : default

Static Router Port :

Dynamic Router Port :

Router IP :

Forbidden Router Port :

Total Entries: 1

DGS-3620-28PC:admin#

69-18 show mld_snooping forwarding

Description

This command is used to display the switch’s current MLD snooping forwarding table. It provides

an easy way for users to check the list of ports that the multicast group comes from specific

sources will be forwarded to. The packet comes from the source VLAN. They will be forwarded to

the forwarding ports.

Format

show mld_snooping forwarding {[vlan <vlan_name 32> | vlanid <vlanid_list>]}

Parameters

vlan - (Optional) Specifies the name of the VLAN for which to view MLD snooping forwarding

table information.

<vlan_name 32> - Specifies the VLAN name. The maximum length is 32 characters.

vlanid - (Optional) Specifies the ID of the VLAN for which to view MLD snooping forwarding table

information.

<vlanid_list> - Enter the VLAN ID list.

Note: If no parameter is specified, the system will display all currently configured MLD

snooping forwarding entries.

D-Link xStack DGS-3620 Series User Manual

Questions and Answers: