D-Link xStack DGS-3620 Series - Page 81

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
76
4-23 show authen server_host
Description
This command is used to display authentication server hosts.
Format
show authen server_host
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server hosts:
DGS-3620-28PC:admin#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- ---------- -----------------------
10.1.1.222 TACACS+ 15555 10 ------ 123
Total Entries : 1
DGS-3620-28PC:admin#
4-24 config authen parameter response_timeout
Description
This command is used to configure the amount of time waiting for users to input on the console
and Telnet applications.
Format
config authen parameter response_timeout <int 0-255>
Parameters
<int 0-255> - Enter the amount of time for user input on console or Telnet. 0 means there is no
time out. The default value is 30 seconds.
Restrictions
Only Administrator-level users can issue this command.