xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
822
Example
To display the MLD configurations on all interfaces:
DGS-3620-28PC:admin# show mld
Command: show mld
MLD Interface Configurations
MRT = Maximum Response Time, LLQI = Last Listener Query Interval
Interface Version Query MRT Robustness LLQI State
---------- ------ ------ ---- ---------- ----- --------
System 2 125 10 2 1 Disabled
n10 2 125 10 2 1 Enabled
n11 2 125 10 2 1 Disabled
n12 2 125 10 2 1 Disabled
Total Entries: 4
To display the MLD configurations for interface “Interface1”:
DGS-3620-28PC:admin#show mld ipif Interface1
Command: show mld ipif Interface1
MLD Interface Details
Interface : Interface1
IPv6 Link-Local Address : FE80::123D:34AC/128
Querier : -
Status : Disabled
Version : 2
Query Interval : 125 sec
Max Response Time : 10 sec
Robustness : 2
Last Listener Query Interval: 1 sec
Last Listener Query Count : 2
Startup Query Count : 2
Startup Query Interval : 31 sec
Total Entries: 1
72-3 show mld group
Description
This command is used to display the MLD group member table.
To Next Page
Loading...
Need help?
General