D-Link xStack DGS-3620 Series - Page 848

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
843
Example
To display SNMP traps:
DGS-3620-28PC:admin#show snmp traps
Command: show snmp traps
SNMP Traps : Enabled
Authenticate Trap : Enabled
Linkchange Traps : Enabled
Coldstart Traps : Enabled
Warmstart Traps : Enabled
DGS-3620-28PC:admin#
To display SNMP linkchange traps:
DGS-3620-28PC:admin#show snmp traps linkchange_traps
Command: show snmp traps linkchange_traps
Linkchange Traps : Enabled
Port 1 : Enabled
Port 2 : Enabled
Port 3 : Enabled
Port 4 : Enabled
Port 5 : Enabled
Port 6 : Enabled
Port 7 : Enabled
Port 8 : Enabled
Port 9 : Enabled
Port 10: Enabled
Port 11: Enabled
Port 12: Enabled
Port 13: Enabled
Port 14: Enabled
Port 15: Enabled
Port 16: Enabled
Port 17: Enabled
Port 18: Enabled
Port 19: Enabled
Port 20: Enabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
74-19 config snmp coldstart_traps
Description
This command is used to configure the trap state for coldstart events.
Format
config snmp coldstart_traps [enable | disable]