D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
878
synchronized.
<value
0
-15> - Enter the stratum value of master NTP server that the system will claim to be
synchronized. The larger value is for the lower accuracy. 0 is used to clear.
Restriction
Only Administrators, Operators and Power Users can issue this command.
Examples
To configure a router as an NTP master clock to which peers may synchronize:
DGS-3620-28PC:admin# config ntp master_stratum 8
Command: config ntp master_stratum 8
Success.
DGS-3620-28PC:admin#
76-9 config ntp max_associations
Description
This command is used to configure the maximum number of NTP peers and clients on the Switch.
This command is used to avoide the Switch is overwhelmed by huge numbers of NTP
synchronization requests or allows large numbers of devices to synchronize with the Switch for an
NTP master server.
Format
config ntp max_associations <value 1-64>
Parameters
<value 1-64> - Enter the maximum number of NTP peers and clients limited on the Switch.
Restriction
Only Administrators, Operators and Power Users can issue this command.
Examples
To configure the maximum number of NTP peers and clients on the Switch as 20:
DGS-3620-28PC:admin# config ntp max_associations 20
Command: config ntp max_associations 20
Success.
DGS-3620-28PC:admin#

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English