D-Link xStack DGS-3620 Series - Page 907

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
902
stub_summary - (Optional) Specifies whether the summary LSA is effective for this area.
enable - Specifies that the STUB summary option will be enabled.
disable - Specifies that the STUB summary option will be disabled.
metric - (Optional) Specifies the metric (1 - 65535; 0 for auto cost) of this area.
<value 0-65535> - Enter the metric value used here. This value must be between 0 and
65535.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure an OSPF area’s settings:
DGS-3620-28PC:admin# config ospf area 10.48.74.122 type stub stub_summary
enabled metric 1
Command: config ospf area 10.48.74.122 type stub stub_summary enabled metric 1
Success.
DGS-3620-28PC:admin#
78-8 delete ospf area
Description
This command is used to delete an OSPF area.
Format
delete ospf area <area_id>
Parameters
<area_id> - Enter the OSPF area ID used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an OSPF area:
DGS-3620-28PC:admin# delete ospf area 10.48.74.122
Command: delete ospf area 10.48.74.122
Success.
DGS-3620-28PC:admin#