D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
909
Format
delete ospf virtual_link <area_id> <neighbor_id>
Parameters
<area_id> - Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
<neighbor_id> - Specifies the OSPF router ID for the remote area. This is a 32-bit number in
the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area’s Area
Border Router. This is the router ID of the neighbor router.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an OSPF virtual link:
DGS-3620-28PC:admin# delete ospf virtual_link 10.1.1.12 20.1.1.1
Command: delete ospf virtual_link 10.1.1.12 20.1.1.1
Success.
DGS-3620-28PC:admin#
78-18 show ospf virtual_link
Description
This command is used to display the current OSPF virtual interface configuration.
Format
show ospf virtual_link {<area_id> <neighbor_id>}
Parameters
<area_id> - (Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx)
that uniquely identifies the OSPF area in the OSPF domain.
<neighbor_id> - (Optional) The OSPF router ID for the remote area. This is a 32-bit number in
the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area’s Area
Border Router. This is the router ID of the neighbor router.
If no parameter is specified, the system will display all current OSPF virtual interface
configuration.
Restrictions
None.
Example
To display the current OSPF virtual interface configuration:

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English