D-Link xStack DGS-3620 Series - Page 975

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
970
83-8 enable pim6
Description
This command is used to enable the PIM global state for IPv6 network.
Format
enable pim6
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To enable PIM global state for IPv6 network:
DGS-3620-28PC:admin# enable pim6
Command: enable pim6
Success.
DGS-3620-28PC:admin#
83-9 disable pim6
Description
This command is used to disable the PIM global state for IPv6 network.
Format
disable pim6
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To disable PIM-SM for IPv6 network: