D-Link xStack DGS-3620 Series - Page 983

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
978
Restrictions
None. (EI Mode Only Command)
Example
To show the static RP:
DGS-3620-28PC:admin# show pim6 static_rp
Command: show pim6 static_rp
PIM6 Static RP Table
---------------------------------------------
Group : FF1E:9B::/64
RP Address : 3000::1
Override Dynamic : True
Group : FF1E:9C::/64
RP Address : 3000::5
Override Dynamic : False
Total Entries: 2
DGS-3620-28PC:admin#
83-18 show pim6 rpset
Description
This command is used to list the entire active RP information.
Format
show pim6 rpset
Parameters
None.
Restrictions
None. (EI Mode Only Command)
Example
To show the entire active RP information:
DGS-3620-28PC:admin# show pim6 rpset
Command: show pim6 rpset
Bootstrap Router: 2008::1
PIM6 RP-Set Table