Diagnostics
Reference Manual 155
Online Mode
Presence Sensor Stuck Timeout
Select Disable or a time interval in seconds or minutes from the drop-down list. If a
time interval is selected, a stuck sensor will report an error after the selected
interval.
No Phase Timeout
Select Disable or a time interval in seconds or minutes from the drop-down list. If a
time interval is selected, a stuck sensor will report an error after the selected
interval.
Protocol Index Alarms
Select the check box to enable protocol index alarm messages
Maximum Consecutive Lost Protocol Indexes
Enter the number of consecutive lost protocol indexes allowed before an error is
reported.
Maximum % Of Lost Protocol Indexes
Enter the maximum percentage of lost protocol indexes allowed before an error is
reported.
To Next Page
Loading...
Need help?
General
