Basic Installation Procedures with the CBX510
Reference Manual 193
18. Run the PackTrack calibration procedure
(see section “PackTrack™” on
page 211
).
19. When the scanner(s) has been configured and calibrated, backup the system
co
ngfiguration using Utilities | Backup or Restore. It is recommended to
save the system paramaters to the backup module on the CBX510 and to a
file on your computer.
20. Select Backup from the Action drop-down list, and select Flash Memory
from the To drop-down list.
21. Click OK. The following message will be displayed.
22. Next, select Backup from the Action drop-down list, and select File from the
To drop-down list.
23. Click OK to
download the configuration text file (param.txt) to your com-
puter.
To Next Page
Loading...
