Enter/Exit Programming Mode UPC/EAN Global Settings
98 Heron™ HD3130
UPC/EAN Global Settings
This section provides configuration settings for UPC-A, UPC-E, EAN 13 and EAN
8 symbologies, and affects all of these unless otherwise marked for each fea-
ture description.
UPC/EAN Decoding Level
Decoding Levels are used to configure a bar code symbology decoder to be very
aggressive to very conservative depending on a particular customer’s needs.
See "Decoding Levels" on pa
ge 245 for more detai
led programming instruc-
tions.
UPC/EAN Decoding Level = 1
UPC/EAN Decoding Level = 2
UPC/EAN Decoding Level = 3
UPC/EAN Decoding Level = 4
UPC/EAN Decoding Level = 5
$CUNDL01
$CUNDL02
$CUNDL03
$CUNDL04
$CUNDL05
To Next Page
Loading...
Need help?
General
