Enter/Exit Programming Mode Audio Jingles
66 Heron™ HD3130
Audio Jingle Enable
This option determines whether the scanner will sound predefined “Jingles” (a
short, user-defined tune uploaded via Datalogic Aladdin™ configuration soft-
ware) or traditional beep sounds to indicate good read.
See below for
parameters to define which preloaded Jing
le to sound upon
power-up or good read events. Additional items such as enter stand mode, exit
stand mode, and error beep can also be programmed using Datalogic Aladdin.
Audio Jingle = Disable (Use traditional beep sounds)
Audio Jingle = Enable Jingles
$CAUEN00
$CAUEN01
To Next Page
Loading...
