Reading Parameters Enter/Exit Programming Mode
Product Reference Guide
65
LED and Speaker Indicators
Power On Alert
Disables or enables the indication (from the Speaker) that the scanner is receiv-
ing power.
Audio Jingles
The scanner can be set up to sound a predefined “Jingle” (a short, user-defined
tune uploaded via Datalogic Aladdin™ configuration software) or traditional
beep sounds to indicate good read and power-up events.
To upload a jingle in Aladdin:
1. Install Datalogic Aladdin™ (v 1.7.0.0.0 or later) on your computer.
2. Connect the scanner you want to program to the computer.
3. Use Device Autodetection to allow Aladdin to sea
rch for your reader, or
click on Offline Configuration to select the file for your device.
4. After the Configuration screen opens, click on the music icon in the menu
bar i
n the upper right-hand part of the screen:
You will be prompted to specify a sound file to upload. The supported format of
audio files is WAV uncompressed PCM. Best quality is obtained using stereo
audio files with 16 bit encoding.
Up to 15 jingles can be uploaded and programmed.
$CBPPU00
Power On Alert = Disable (No Audible Indication)
$CBPPU01
Power On Alert = Power-up Beep
DEFAULT
To Next Page
Loading...
