Enter/Exit Programming Mode Codablock F
204 Heron™ HD3130
Codablock F Set Length 1
This feature specifies one of the bar code lengths for Codablock F Length Con-
trol on page 203
. Length 1 is the minimum label length if in Variable Length on
page 203
Mode, or the first fixed length if in Fixed Length on page 203 Mode.
Length includes the bar code’s data characters only.
The length can be set from 003 to 255 characters. See
"Set Length 1" on
page 245 for more detailed programming instructions.
Select Codablock F Length 1 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
t
he entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
003 = Length 1 is 3 Characters
$CCFL1
~
To Next Page
Loading...
