Error Codes
Product Reference Guide
253
Error Codes
Upon startup, if the scanner sounds a long tone, this means the scanner has
not passed its automatic Selftest and has entered FRU (Field Replaceable Unit)
isolation mode. If the scanner is reset, the sequence will be repeated. The fol-
lowing table describes the L
E
D flashes/beep codes associated with an error
found.
1 Configuration
Contact Helpdesk for assis-
tance
2 Interface PCB
5 [Reserved]
6 Digital PCB
NUMBER OF
LED
FLASHES/
BEEPS
ERROR CORRECTIVE ACTION
To Next Page
Loading...
