Symbologies Enter/Exit Programming Mode
Product Reference Guide
205
Codablock F Set Length 2
This feature specifies one of the bar code lengths for Codablock F Length Con-
trol on page 203. Length 2 is the maximum label length if in Variable Length on
page 203 Mode, or the second fixed
length if in Fixed Length on page 203
Mode. Length includes the bar code’s check, data, an
d full-ASCII shift charac-
ters. The length does not include start/stop characters.
The length can be set from 003 to 255 characters. A setting of 00 specifies to
ig
no
re this length (only one fixed length). See "Set Length 2" on page 24
7 for
more detailed programmi
ng instructions.
Select Codablock F Length 2 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save t
he entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
100 = Length 2 is 100 Characters
$CCFL2
~
To Next Page
Loading...
Need help?
General
