Datalogic Heron HD3100 - Code 93 Check Character Transmission; Code 93 Length Control

Symbologies Enter/Exit Programming Mode
Product Reference Guide 195
Code 93 Check Character Transmission
Enables/disables transmission of an optional Code 93 check character.
Code 93 Check Character Transmission = Disable
Code 93 Check Character Transmission = Enable
DEFAULT
Code 93 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Code 93 symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
$CC9CC02
Code 93 Check Character Calculation = Enable Check K
$CC9CC03
Code 93 Check Character Calculation =
Enable Check C and K
DEFAULT
$CC9CT00
$CC9CT01