Product Reference Guide
257
Appendix B
Standard Defaults
The most common configuration settings are listed in the “Default” column of
Table 26. The settings in this table are as applied to a standard RS-232 inter-
face. See Table 27 for a listing of default exceptions to this list as applied to
other interface types. Page references are also provided for feature descriptions
and programming bar codes for each parameter. A column has also been pro-
vided for recording of your pref
erred default settings for these same configu-
rable features.
Table 26. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 19
USB Suspend Mode
Disable 20
RS-232
Baud Rate
9600 21
Stop Bits
1 Stop Bit 22
Parity
None 23
Handshaking Control
RTS 24
RS-232/USB-COM
Intercharacter Delay
No Delay 26
Beep On ASCII BEL
Disable 27
Beep On Not on File
Enable 27
ACK Character
‘ACK’ 29
NAK Character
‘NAK’ 29
ACK NAK Timeout Value
600 ms 30
To Next Page
Loading...
Need help?
General
