Enter/Exit Programming Mode MSI
190 Heron™ HD3130
MSI Set Length 1
This feature specifies one of the bar code lengths for MSI Length Control on
page 189
. Length 1 is the minimum l
abel length if in
Variable Length on page
189
Mode, or the first fixe
d length if in
Fixed Length on page 189 Mode. Length
includes the bar code’s data
characters only.
The length can be set from 01 to 50 characters. See
"Set Length 1" on page 245
for more detailed programming instru
ctions.
Select MSI Set Length 1 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
Appendix D, Key-
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
t
he entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character
$CMSL1
~
To Next Page
Loading...
