Datalogic Heron HD3100 - Label ID: Set Individually Per Symbology; Label ID Control

Data Format Enter/Exit Programming Mode
Product Reference Guide 53
Label ID: Set Individually Per Symbology
This feature configures a Label ID individually for a single symbology.
NOTE
This setting requires the scanning of bar codes from multiple
sect
ions. See
"Label ID: Set Individually Per Symbology"
on page 234 for more detailed programming instructions.
Label ID Control
This option controls whether a Label ID is disabled, or sent as a prefix or suffix
for a given symbology type.
DEFAULT
Label ID Transmission = Disable
Label ID Transmission = Enable as Prefix
Label ID Transmission = Enable as Suffix
CANCEL
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
$CIDCO00
$CIDCO01
$CIDCO02
~