Data Format Enter/Exit Programming Mode
Product Reference Guide
51
Global AIM ID
NOTE
This feature enables/disables addition of AIM IDs for all symbology types.
AIM label identifiers (as opposed to custom characters you select yourself as
with label identifiers) can be included with scanned bar code data. See "Global
AIM ID" on pa
ge 231 for more detailed programming instructions.
DEFAULT
Global AIM ID = Disable
Global AIM ID = Enable
GS1-128 AIM ID
If Global AIM ID is disabled, the AIM ID for GS1-128 can be enabled/disabled
independently. The AIM ID for GS1-128 is a ]C1, ]C2 or ]C3.
AIM IDs for other symbologies can be enabled/disabled independently as
well.
Contact Customer Support for assistance.
GS1-128 AIM ID = Disable
GS1-128 AIM ID = Enable
$CAIEN00
$CAIEN01
$CU8AI00
$CU8AI01
To Next Page
Loading...
Need help?
General
