Datalogic Heron HD3100 - Codablock F AIM Check; Codablock F Length Control

Symbologies Enter/Exit Programming Mode
Product Reference Guide 203
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F AIM Check = Not AIM compliant
Codablock F AIM Check = AIM compliant
DEFAULT
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Codablock F symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
Codablock F Length Control = Variable Length
Codablock F = Fixed Length
$CCFAC00
$CCFAC01
$CCFLC00
$CCFLC01