Enter/Exit Programming Mode RGB LED Settings
76 Heron™ HD3130
RGB LED Settings
The following configuration Items specify settings for the RGB (Red Green Blue)
LEDs, which are used to indicate Good Read and Auto Presentation Mode (colors
change when Scanner is in Idle mode).
Enable/Disable RGB LED
Enable/Disable RGB LED as a good read indicator..
RGB LED = Disable
RGB LED = Enable
DEFAULT
Good Read Beep Length (continued)
$CBPLE12
Good Read Beep Length = 180 msec
$CBPLE14
Good Read Beep Length = 200 msec
$CRGBE00
$CRGBE01
To Next Page
Loading...
