Configuring System Information 213
Figure 6-93. Access Control Group
The Access Control Group page contains the following fields:
•
Group Name
— Contains a list of user-defined groups to which access control rules are applied. A
group name can contain a maximum of 30 alphanumeric characters.
•
Security Model —
Defines the SNMP version attached to the group. The possible field values are:
–
SNMPv1
— SNMPv1 is defined for the group.
–
SNMPv2
— SNMPv2 is defined for the group.
–
SNMPv3
— SNMPv3 User Security Model (USM) is defined for the group.
•
Security Level
— The security level attached to the group. Security levels apply to SNMPv3 groups
only. The possible field values are:
–
noauth no priv
— Neither Authentication nor Privacy security levels are assigned to the group.
–
auth nopriv
— Authenticates SNMP messages without encrypting them.
–
auth priv
— Authenticates SNMP messages and encrypts them.
•
Context Prefix (1
–
30)
— This field permits the user to specify the context name by entering the first 1
to 30 characters of the context name.
•
Operation
— Defines group access rights. The possible field values are:
To Next Page
