Dell PowerConnect M8024 - Page 230

228 Configuring System Information
4. Click Apply Changes .
The notification recipient is added, and the device is updated.
Displaying the Notification Recipients Tables
1.
Open Notification Recipients page.
2. Click Show All .
The
Notification Recipient Tables page opens:
Figure 6-108. Notification Recipient Tables
Removing Notification Recipients
1. Open the Notification Recipients page.
2. Click Show All .
The
Notification Recipient Tables page open.
3. Select the Remove check box for one or more notification recipients in the SNMPV1,2 Notification
Recipient
and/or SNMPv3 Notification Recipient Tables .
4. Click Apply Changes .
The recipients are removed, and the device is updated.
Defining SNMP Notification Recipients Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• SNMP Commands.