Dell SC8000 - Perform Post-Setup Tasks; Verify Connectivity and Failover

Complete the Startup Wizard
Dell Compellent 155
2 Create therequiredfaultdomains.Foradual‐controllerStorageCenter,createafault
domainforeachpairofredundantFCports.Forasingle‐controllerStorageCenter,
createasinglefaultdomainforallFCports.
a ClickEditFaultDomains.Thewizarddisplaysalistofthecurrentlydefined
fault
domains.
b ClickCreateFaultDomain.Adialogboxappears.
c IntheNamefield,typeanameforthefaultdomain.
d FromtheTypedrop‐downmenu,selectFC.
e (Optional)IntheNotesfield,typeadescriptionofthefaultdomain.
f ClickContinue.Thedialogboxdisplaysasummary.
g ClickCreateNowtocreatethefaultdomain.
h Repeatstepsb–gasneededtocreateadditionalfaultdomains.
i Whenyouarefinishedcreatingfaultdomains,clickReturn.TheFCtabappears.
3 Configureeachback ‐endFCport.
a Setthe PurposefieldtoBackEnd.
b ConfirmthattheFault
Domainfieldissetto<none>.
c (Optional)TypeadescriptivenameintheUserAliasfield.
4 Configureeachfront‐endFCport.
a Setthe PurposefieldtoFrontEndPrimaryorFrontEndReservedasappropriate.
b SettheFaultDomainfieldtotheappropriatefaultdomainthatyoucreated.
c (Optional)
TypeadescriptivenameintheUserAliasfield.
5 ConfigureeachportthatisunusedorusedforIPCbetweencontrollers.
a Setthe PurposefieldtoUnknown.
b ConfirmthattheFaultDomainfieldissetto<none>.
c (Optional)TypeadescriptivenameintheUserAliasfield.