INTRODUCTION
TABLE OF CONTENTS
page page
E-MARK LABEL
DESCRIPTION............................1
VEHICLE IDENTIFICATION NUMBER
DESCRIPTION............................1
TORQUE REFERENCES
DESCRIPTION............................3
E-MARK LABEL
DESCRIPTION - E-MARK LABEL
An E-mark Label (Fig. 1) is located on the rear
shut face of the driver’s door. The label contains the
following information:
• Date of Manufacture
• Month-Day-Hour (MDH)
• Vehicle Identification Number (VIN)
• Country Codes
• Regulation Number
• Regulation Amendment Number
• Approval Number
VEHICLE IDENTIFICATION
NUMBER
DESCRIPTION
The Vehicle Identification Number (VIN) can be
viewed through the windshield at the upper left cor-
ner of the instrument panel next to the left A-pillar
on left-hand-drive and right-hand-drive vehicles (Fig.
2) (Fig. 3). The VIN consists of 17 characters in a
combination of letters and numbers that provide spe-
cific information about the vehicle. Refer to the VIN
Decoding Information Table to interpret VIN code.
Fig. 1 E-Mark Label
1 - Country Code
2 - Regulation Number
3 - Approval Number
4 - Amendment Number
Fig. 2 VIN Plate Location – R.H.D.
PL INTRODUCTION 1s
ProCarManuals.com
To Next Page
Loading...
