Dodge Neon 2001 - ASSEMBLY

(41) Remove overrunning clutch cam assembly
(Fig. 41). Collect eight rollers and eight springs from
rear of case (Fig. 42).
(42) Remove low/reverse band (Fig. 43).
(43) Remove and inspect #11 thrust washer (Fig.
44).
Fig. 41 Overrunning Clutch Cam Assembly
1 - OUTPUT SHAFT
2 - OVERRUNNING CLUTCH CAM ASSEMBLY
Fig. 42 Overrunning Clutch Rollers and Spring
1 - LOW-REVERSE BAND
2 - OVERRUNNING CLUTCH ROLLERS (8)
3 - OVERRUNNING CLUTCH SPRINGS (8)
Fig. 43 Low/Reverse Band and Strut
1 - #11 THRUST WASHER
2 - LOW-REVERSE BAND
3 - STRUT
Fig. 44 No. 11 Thrust Washer
1 - #11 THRUST WASHER
2 - OUTPUT SHAFT
21s - 34 31TH AUTOMATIC TRANSAXLE PL
31TH AUTOMATIC TRANSAXLE (Continued)
ProCarManuals.com
2001 NEON