INSTALLATION
CAUTION: Front seat belt assemblies must be
replaced after a collision.
CAUTION: Front seat belt adjuster must be in the
lowest position when Installing adjuster knob.
(1) Place into position the shoulder belt adjuster.
(2) Install bolts attaching shoulder belt adjuster to
B-pillar. Tighten all seat belt bolts to 40 N·m (30 ft.
lbs.) torque.
(3) Install B-pillar trim.
PL RESTRAINTS 8Os - 11
SHOULDER BELT HEIGHT ADJUSTER (Continued)
ProCarManuals.com
To Next Page
Loading...
