Dodge Neon 2001 - ASSEMBLY

(65) Remove low/reverse piston retainer (Fig. 75).
(66) Remove low/reverse piston retainer-to-case
gasket (Fig. 76).
(67) Using a hammer and suitable drift, drive out
inner output bearing cup (Fig. 77).
(68) Using tool 6062, remove outer output bearing
cup (Fig. 78).
Fig. 75 Remove Piston Retainer
1 - LOW/REVERSE CLUTCH PISTON RETAINER
2 - GASKET
Fig. 76 Remove Piston Retainer Gasket
1 - GASKET HOLES MUST LINE UP
2 - LOW/REVERSE CLUTCH PISTON RETAINER GASKET
Fig. 77 Remove Output Bearing Inner Cup
1 - OUTPUT BEARING CUPS (REPLACE IN PAIRS)
2 - HAMMER
3 - BRASS DRIFT
Fig. 78 Remove Output Bearing Outer Cup
1 - TOOL 6062
21s - 94 41TE AUTOMATIC TRANSAXLE PL
41TE AUTOMATIC TRANSAXLE (Continued)
ProCarManuals.com
2001 NEON